New Membership Platform: Membee

The ACD Club is rolling out a new online membership system. All ACD Club Members should have receivied an email with enrollment instructions. You will use your email address as your login, and select a new password. This account will be used to renew your membership, update membership information, and make changes to your membership record.


This account is NOT THE SAME as your current account which you use to access the ACD Website Forums. Please continue to log into the Forums with the same username and password as you have always used. In the future we may consolidate the two accounts.

Gear Selector Switch Wiring

More
03 Feb 2021 02:14 #42087 by Mike Brady
Replied by Mike Brady on topic Gear Selector Switch Wiring
AJ
The diagram on page 4 (May 12th) shows the wire separator. I made mine out of fish paper and punched the holes with a leather punch. I also inserted a roll of fish paper between the switch and the casting.....just in case.
The following user(s) said Thank You: alsancle

Please Log in or Create an account to join the conversation.

More
03 Feb 2021 02:21 #42088 by uconn_1965
Replied by uconn_1965 on topic Gear Selector Switch Wiring
I just looked at some of my spare shift parts. I don’t have an extra separator but I pulled one out of a complete spare arm that I have. I’d be happy to send it to you to copy along with the cardboard rectangular insulator that goes inside the switch. Just send me your name and mailing address and I’ll put it in the mail. I took a picture of the 2 pieces but can’t see how I attach the photo to this reply

Please Log in or Create an account to join the conversation.

More
03 Feb 2021 13:49 #42091 by alsancle
Replied by alsancle on topic Gear Selector Switch Wiring
Thanks guys. I replied in the other thread with the pictures. I just ordered some fish paper and don't see a big deal making one.

Please Log in or Create an account to join the conversation.

More
03 Feb 2021 13:57 #42094 by alsancle
Replied by alsancle on topic Gear Selector Switch Wiring
Jim,

You mentioned that one of the contacts looked bad. Could you look at these pictures and tell me which one you were looking at?


Attachments:

Please Log in or Create an account to join the conversation.

More
03 Feb 2021 13:59 #42095 by uconn_1965
Replied by uconn_1965 on topic Gear Selector Switch Wiring
My eyes are getting bad but I would say #3
The following user(s) said Thank You: alsancle

Please Log in or Create an account to join the conversation.

  • JIM.OBRIEN
  • Offline
  • Frequent Forum Contributor
  • Frequent Forum Contributor
More
04 Feb 2021 03:19 #42102 by JIM.OBRIEN
Replied by JIM.OBRIEN on topic Gear Selector Switch Wiring
Number 3 was the one I saw earlier. But the whole face on 4 thru 8 needs a good cleaning up before you do anything. Then check the connections like I explained earlier. if you have a questions on it call me at 484-650-2124, I can walk you thru it.
The following user(s) said Thank You: alsancle

Please Log in or Create an account to join the conversation.

Time to create page: 0.342 seconds
Powered by Kunena Forum