- Posts: 147
- Thank you received: 57
Rear fender welt
- Tim Gilmartin
- Offline
- ACD Club Past President
-
Registered
Less
More
26 May 2020 18:08 #40268
by Tim Gilmartin
Replied by Tim Gilmartin on topic Rear fender welt
In my reply under Club Info, I said it should be one piece. Also, should be the same color as the body. Better to paint it separately from the car using an additive ( softener) that allows the welt to bend without cracking the paint
Tim..
Tim..
Please Log in or Create an account to join the conversation.
- wcoye
- Topic Author
- Offline
- Moderator
-
Registered
Less
More
- Posts: 267
- Thank you received: 6
26 May 2020 18:06 #40267
by wcoye
Bill Coye
Westchester 2240A
Brag line: Winner of the
2014 Hillsborough Concurs Strother MacMinn award
Replied by wcoye on topic Rear fender welt
Thanks Bill, That makes sense to me
Bill Coye
Westchester 2240A
Brag line: Winner of the
2014 Hillsborough Concurs Strother MacMinn award
Please Log in or Create an account to join the conversation.
- Rileypu29
- Offline
- Senior Forum User
-
Registered
Less
More
- Posts: 82
- Thank you received: 14
26 May 2020 17:36 #40263
by Rileypu29
Bill Kastanis
Replied by Rileypu29 on topic Rear fender welt
Hi Bill,
The fender welt on my Phaeton is one continuous piece that goes around the bumper brackets and continues down the fender. I cannot vouch for the originality but it would seem to be the better way to run the welt.
Best regards,
Bill Kastanis
The fender welt on my Phaeton is one continuous piece that goes around the bumper brackets and continues down the fender. I cannot vouch for the originality but it would seem to be the better way to run the welt.
Best regards,
Bill Kastanis
Bill Kastanis
Please Log in or Create an account to join the conversation.
- wcoye
- Topic Author
- Offline
- Moderator
-
Registered
Less
More
- Posts: 267
- Thank you received: 6
26 May 2020 14:48 #40262
by wcoye
Bill Coye
Westchester 2240A
Brag line: Winner of the
2014 Hillsborough Concurs Strother MacMinn award
Rear fender welt was created by wcoye
Getting ready to send my Westchester out for a quality paint job. Are the rear fender welts one continuous piece or split as in the photo ? Somewhere along the line a pair of incorrect boots were installed and welt was hacked away. Darn photo is upside down . Note the plastic patch . The slot the bumper support goes through was elongated for no apparent reason. Fortunately, the missing metal is still there , hammered out of the way.
Bill Coye
Westchester 2240A
Brag line: Winner of the
2014 Hillsborough Concurs Strother MacMinn award
Please Log in or Create an account to join the conversation.