Cord Tool Kit and Roll

  • Terry Cockerell
  • Topic Author
  • Offline
  • Frequent Forum Contributor
  • Frequent Forum Contributor
More
07 Aug 2019 00:52 #37953 by Terry Cockerell
Cord Tool Kit and Roll was created by Terry Cockerell
After finding the attached picture of a Cord tool kit and roll on the Internet I decided to replicate one however I have a few questions.
1. What are the overall dimensions of an original tool roll when laid out flat?
2. Are the tools shown in the attached picture correct ?
3 What does the outside of the tool roll look like?
4. The wheel bolt spanner in the middle of the roll appears to be about 1 ft long. Where as I have other information that shows the spanner to be 16" long.
I would appreciate any comments on this so that I can make a good reproduction.
Thanks,
Terry Cockerell
Australia

T cockerell
Attachments:

Please Log in or Create an account to join the conversation.

More
07 Aug 2019 15:07 #37956 by 1748 S
Replied by 1748 S on topic Cord Tool Kit and Roll
Terry I can post a picture with demensions later today about my lug wrench. I believe I have the exact wrench you have pictured. I thought the lug wrench was actually much longer and had a chiesel end to it.


Gary Parsons

Please Log in or Create an account to join the conversation.

More
07 Aug 2019 18:25 - 07 Aug 2019 19:01 #37959 by 1748 S
Replied by 1748 S on topic Cord Tool Kit and Roll
Terry here are the lug wrnch demensions as found. Am not positive this is an original but... It came with the car and fits the lug bolts. Untill I saw what you posted pics of I always thought the wrench HAD to be longer for leverage. Enjoy.


Gary Parsons

Just finished some digging thru my collection of pictures from ACD members about original bumper jacks. Found this..
Last edit: 07 Aug 2019 19:01 by 1748 S.

Please Log in or Create an account to join the conversation.

More
07 Aug 2019 18:41 #37960 by 1748 S
Replied by 1748 S on topic Cord Tool Kit and Roll
Well it fits but...Appearantly this probably is NOY an original wrench.I power wire buffed it to find these numbers and part maker.Might be towards the end of ACD "they " had to find another company that would supply parts waiting for payment later. Who knows. Mine looks different from this one you posted pics of Terry.


Gary Parsons
Attachments:

Please Log in or Create an account to join the conversation.

  • Terry Cockerell
  • Topic Author
  • Offline
  • Frequent Forum Contributor
  • Frequent Forum Contributor
More
07 Aug 2019 21:08 #37961 by Terry Cockerell
Replied by Terry Cockerell on topic Cord Tool Kit and Roll
Hi Gary, I do not think the wrench you have had anything to do with a Cord except that it just happens to fit the wheel bolts.
Attached is another information sheet that I have. It describes the jack and wrench as being supplied to early production cars and then a screw jack was supplied to later cars.

T cockerell
Attachments:
The following user(s) said Thank You: johnmereness

Please Log in or Create an account to join the conversation.

More
07 Aug 2019 23:44 #37966 by 1748 S
Replied by 1748 S on topic Cord Tool Kit and Roll
Thanks Terry. So the canvas tool bag was made from the same material as the gas filler neck. That helps...


Gary Parsons

Please Log in or Create an account to join the conversation.

Time to create page: 0.140 seconds
Powered by Kunena Forum