Tranny Cover Removal

Mike Markin
Topic Author
Offline
Moderator
Registered

12 Aug 2011 16:58 #20716 by Mike Markin

Replied by Mike Markin on topic Tranny Cover Removal

Thanks, Pat. I appreciate it.

Please Log in or Create an account to join the conversation.

Pat Leahy
Offline
Moderator
Registered

12 Aug 2011 14:52 #20715 by Pat Leahy

Replied by Pat Leahy on topic Tranny cover

Yes, first remove the (2) bolts holding the bumper assemble to the frame/body. Then remove the 2 -1/4" bolt behind the fence (grill) holding the cover to the fenders. Last (if present), remove the 2 bolts at the bottom of transmission cover to the fender frame. Carefully slide straight out.

Pat Leahy

Please Log in or Create an account to join the conversation.

Mike Markin
Topic Author
Offline
Moderator
Registered

12 Aug 2011 14:14 #20714 by Mike Markin

Tranny Cover Removal was created by Mike Markin

I am getting to fianl assembly of my Cord 812 and now find that in order to remove the tranny cover, I must first remove the front bumper. Is this correct? If not, any ideas? Thanks

Mike

Please Log in or Create an account to join the conversation.