Winding me up for headlights

At the moment i'm in contact with two firms who can produce flexible headlight-crankingcables as i need them for my Custom Beverley, some other people might be interested in replacing their old or missing cables.
they will be between 80" and 90" lomg and either in stainless steel or normal.
they will be be straight bolt in replacements.

In the case your interested as well, contact me at :

<a href="mailto:[email protected]][email protected][/url] <!-- s:wink: --><img src="{SMILIES_PATH}/icon_wink.gif" alt="" title="Wink" /><!-- s:wink: --> <!-- s:wink: --><img src="{SMILIES_PATH}/icon_wink.gif" alt="" title="Wink" /><!-- s:wink: --> <!-- s:wink: --><img src="{SMILIES_PATH}/icon_wink.gif" alt="" title="Wink" /><!-- s:wink: --> <!-- s:wink: --><img src="{SMILIES_PATH}/icon_wink.gif" alt="" title="Wink" /><!-- s:wink: --> <!-- s:wink: --><img src="{SMILIES_PATH}/icon_wink.gif" alt="" title="Wink" /><!-- s:wink: -->

Thank you Tom, for your fast replay.
Unfortunatly both are so corroded that they fall appart as you look at it.
but i might have found a source here in Switzerland who can produce them the way you need them.

What I did to save mine is to hang them so they are off the floor. I then squirted penetrating oil so it would flow down inside of them. I periodically tried turn them. I continued the oil treatment and got them to work just fine.


Good luck,

Tom

Hello out there, who can tell me where i can find those flexible cables to replace my seized headlight-winding-cables, please ?

Thanks in advanced, Oldbanger71 <!-- s:?: --><img src="{SMILIES_PATH}/icon_question.gif" alt=":" title="Question" /><!-- s:?: -->