- Posts: 484
- Thank you received: 1
Presurizing a Cord 810/812 Radiator
- pkschafer
- Topic Author
- Visitor
-
Guest
23 May 2008 20:53 #10184
by pkschafer
Replied by pkschafer on topic Presurizing a Cord 810/812 Radiator
Thank you.
Please Log in or Create an account to join the conversation.
- Tom Georgeson
- Offline
- Moderator
-
Registered
Less
More
23 May 2008 20:21 #10182
by Tom Georgeson
Replied by Tom Georgeson on topic Modification
Jim Lawrence from California runs a 4 lb. system. He uses an overflow tank from a 1960's Volvo. He never adds water and it seems to not heat up as much in traffic.
Please Log in or Create an account to join the conversation.
- pkschafer
- Topic Author
- Visitor
-
Guest
22 May 2008 21:41 #10175
by pkschafer
Presurizing a Cord 810/812 Radiator was created by pkschafer
Need some help to determine if anyone has added a 4 lb pressure cap to a Cord radiator. It should raise boiling point significantly and increase effciency of system. Any concerns I should have? Unblown 288.6. What about hood clearance? I read somewhere that this was an appropriate modification to improve the cooling system in old cars.
Please Log in or Create an account to join the conversation.