- Posts: 1341
- Thank you received: 304
Need help with the wiring.
- Terry Cockerell
- Offline
- Elite Forum User
-
Registered
Less
More
09 Feb 2022 07:56 #44856
by Terry Cockerell
T cockerell
Replied by Terry Cockerell on topic Need help with the wiring.
Volk 777, looks like you are doing a top job with restoring your Cord.
I noticed there is green paint visible inside the rear fender area. The Factory sprayed the the inside of the fenders and body with black body deadner or bitumen material to a depth of around 1/8"
This is all laid out in the Engineering Changes on page 15
The above book is included in the Cord Service Manual, Model 810 & 812 which can be purchased from the Museum in Auburn
I noticed there is green paint visible inside the rear fender area. The Factory sprayed the the inside of the fenders and body with black body deadner or bitumen material to a depth of around 1/8"
This is all laid out in the Engineering Changes on page 15
The above book is included in the Cord Service Manual, Model 810 & 812 which can be purchased from the Museum in Auburn
T cockerell
Please Log in or Create an account to join the conversation.
- George van Nostrand
- Offline
- Moderator
-
Registered
Less
More
- Posts: 113
- Thank you received: 35
09 Feb 2022 01:10 #44855
by George van Nostrand
Restoring 1936 Cord Westchester sedan.2023 A
Replied by George van Nostrand on topic Need help with the wiring.
I sent you a diagram of the main harness. by email.
Restoring 1936 Cord Westchester sedan.2023 A
Please Log in or Create an account to join the conversation.
- Volk777
- Topic Author
- Offline
- Non-Member
-
Registered
Less
More
- Posts: 3
- Thank you received: 0
08 Feb 2022 17:41 #44849
by Volk777
Need help with the wiring. was created by Volk777
Good afternoon! Need information or a diagram how to lay the wiring in the 1936 Cord 810 Westchester . My car came partially disassembled. Now it's time to install the wiring and I do not know how to properly lay it.
Please Log in or Create an account to join the conversation.