Skip to main content

oil capacity of Cord 810 crankcase

  • Normandie
  • Topic Author
  • Offline
  • Senior Forum User
  • Registered
More
28 Aug 2021 12:34 #43820 by Normandie
Replied by Normandie on topic oil capacity of Cord 810 crankcase
thank you

Please Log in or Create an account to join the conversation.

  • Terry Cockerell
  • Offline
  • Elite Forum User
  • Registered
More
25 Aug 2021 06:19 - 25 Aug 2021 09:11 #43786 by Terry Cockerell
Replied by Terry Cockerell on topic oil capacity of Cord 810 crankcase
Checking the effective length of my 810 Cord dip stick from the flange down to the first mark is 6 - 1/4"
I suppose I should check the tube length on the sump too ..... I will follow up on this.
The tube length on the outer "longer side" is approximately 5 - 3/4" long.

T cockerell
Last edit: 25 Aug 2021 09:11 by Terry Cockerell. Reason: Revising text

Please Log in or Create an account to join the conversation.

  • mikespeed35
  • Offline
  • ACD Club Life Member
  • Registered
More
25 Aug 2021 03:50 #43785 by mikespeed35
Replied by mikespeed35 on topic oil capacity of Cord 810 crankcase
Before you do that, is it the correct dip stick? Have you compared it to several other Cord dip sticks?
CORDiallyMike

Mike Huffman
The following user(s) said Thank You: 1748 S

Please Log in or Create an account to join the conversation.

  • Normandie
  • Topic Author
  • Offline
  • Senior Forum User
  • Registered
More
25 Aug 2021 01:44 #43783 by Normandie
Replied by Normandie on topic oil capacity of Cord 810 crankcase
Thank you. I agree.

Please Log in or Create an account to join the conversation.

More
25 Aug 2021 01:06 #43782 by wcoye
Replied by wcoye on topic oil capacity of Cord 810 crankcase
Hi, the Cord Service Manual says seven quarts but I'd keep an eye on the dip stick

Bill Coye
Westchester 2240A
Brag line: Winner of the
2014 Hillsborough Concurs Strother MacMinn award
The following user(s) said Thank You: Normandie

Please Log in or Create an account to join the conversation.

  • Normandie
  • Topic Author
  • Offline
  • Senior Forum User
  • Registered
More
23 Aug 2021 17:42 #43772 by Normandie
oil capacity of Cord 810 crankcase was created by Normandie
This may appear to be an elementary question, but here goes. According to the Cord owner's manual the oil capacity in the Cord 810 crankcase is eight quarts. I've had ACD Cord owners tell me that correct capacity is seven quarts. I've also been told that the crankcase should be filled until it reads "full" on the dipstick, which may not be eight quarts.
I would like to hear what others think. I drive my Cord regularly so I want to be sure the the crankcase and transmission are properly filled. Thanks.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum