New Membership Platform: Membee

The ACD Club is rolling out a new online membership system. All ACD Club Members should have receivied an email with enrollment instructions. You will use your email address as your login, and select a new password. This account will be used to renew your membership, update membership information, and make changes to your membership record.


This account is NOT THE SAME as your current account which you use to access the ACD Website Forums. Please continue to log into the Forums with the same username and password as you have always used. In the future we may consolidate the two accounts.

Transmission/Shift wiring harness

More
01 May 2021 17:53 #43018 by uconn_1965
Replied by uconn_1965 on topic Transmission/Shift wiring harness
There are 2 clips on the radiator support specifically for the purpose of crossing the shift harness from the driver side to the passenger and the soilnoid. That is the only way I’ve ever seen the harness installed.

Please Log in or Create an account to join the conversation.

  • JIM.OBRIEN
  • Offline
  • Frequent Forum Contributor
  • Frequent Forum Contributor
More
01 May 2021 23:02 #43020 by JIM.OBRIEN
Replied by JIM.OBRIEN on topic Transmission/Shift wiring harness
I agree with Cliff.

Please Log in or Create an account to join the conversation.

  • Tim Gilmartin
  • Tim Gilmartin's Avatar
  • Offline
  • ACD Club Past President
  • ACD Club Past President
More
01 May 2021 23:36 #43022 by Tim Gilmartin
Replied by Tim Gilmartin on topic Transmission/Shift wiring harness
Thanks, Cliff. We learn something new every day.
Tim.

Please Log in or Create an account to join the conversation.

  • Terry Cockerell
  • Terry Cockerell's Avatar
  • Offline
  • Frequent Forum Contributor
  • Frequent Forum Contributor
More
02 May 2021 03:01 - 02 May 2021 03:02 #43025 by Terry Cockerell
Replied by Terry Cockerell on topic Transmission/Shift wiring harness
Tim, thinking more about this topic. It would have made sense Production wise to run the looms together on the LHS of the frame. It only requires one set of cable clips and the associated nuts and bolts to fix them in place.
The headlight loom crosses the frame at the back of the brace under the radiator, while the gear change loom crosses at the front of the brace.

T cockerell
Last edit: 02 May 2021 03:02 by Terry Cockerell. Reason: Punctuation revision.

Please Log in or Create an account to join the conversation.

  • eaj564
  • Topic Author
  • Offline
  • ACD Club Member
  • ACD Club Member
More
04 May 2021 14:06 #43046 by eaj564
Replied by eaj564 on topic Transmission/Shift wiring harness
Thank you all, Found a clip jammed into the frame under the rear steering box mounting bolt and seems to make the transition to top of frame work well. Off to solder the switch in,looks like fun! Eric
Attachments:

Please Log in or Create an account to join the conversation.

Time to create page: 0.299 seconds
Powered by Kunena Forum