Skip to main content

Incorrect Autolite GCO 4804A

  • 1748 S
  • Offline
  • Platinum Forum User
  • Registered
More
03 Nov 2020 17:53 #41405 by 1748 S
Replied by 1748 S on topic Incorrect Autolite GCO 4804A
Thanks George. I can always depend on you to be helpful on most anything I ask.


Gary Parsons

Please Log in or Create an account to join the conversation.

  • George van Nostrand
  • Offline
  • Moderator
  • Registered
More
03 Nov 2020 16:23 #41404 by George van Nostrand
Replied by George van Nostrand on topic Incorrect Autolite GCO 4804A
One quick way to spot an incorrect GCO 4804-A generator is to note the position of the oil cups. They must be at the top when installed. Some have new tags with the correct number - beware !
Restoring 1936 Cord Westchester sedan.2023 A
The following user(s) said Thank You: 1748 S

Please Log in or Create an account to join the conversation.

  • uconn_1965
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
03 Nov 2020 01:55 #41391 by uconn_1965
Replied by uconn_1965 on topic Incorrect Autolite GCO 4804A
It’s hard some times to tell from photo’s but the air slots in drive pulley didn’t look right, I couldn’t make out the GCO lettering on the tag, it said it was 50 amps, not 28 amps and the 3 wiring terminals were not in the correct position.

Please Log in or Create an account to join the conversation.

  • 1748 S
  • Offline
  • Platinum Forum User
  • Registered
More
03 Nov 2020 01:33 #41388 by 1748 S
Replied by 1748 S on topic Incorrect Autolite GCO 4804A
seller sold this generator. I did not receive any information about how this differes from a correct generator for our cars.


Gary Parsons

Please Log in or Create an account to join the conversation.

  • 1748 S
  • Offline
  • Platinum Forum User
  • Registered
More
02 Nov 2020 00:30 #41384 by 1748 S
Replied by 1748 S on topic Incorrect Autolite GCO 4804A
Sure was nice seeing this but... Would love to know what the end plate part numbers are. May ask seller..


Gary Parsons

Please Log in or Create an account to join the conversation.

  • uconn_1965
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
01 Nov 2020 20:40 #41373 by uconn_1965
Incorrect Autolite GCO 4804A was created by uconn_1965
If someone is looking for a incorrect Autolite 4804a generator, there is an incorrect one now listed on eBay.
The following user(s) said Thank You: 1748 S

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum