Skip to main content

Thermostat

  • Terry Cockerell
  • Offline
  • Elite Forum User
  • Registered
More
10 Jul 2020 23:36 #40496 by Terry Cockerell
Replied by Terry Cockerell on topic Thermostat
Gary, read around page 38 of Rudy's restoration.

T cockerell

Please Log in or Create an account to join the conversation.

  • johnmereness
  • Offline
  • Moderator
  • Registered
More
09 Jul 2020 18:39 #40487 by johnmereness
Replied by johnmereness on topic Thermostat
Agreed - go with a 160 degree

JMM

Please Log in or Create an account to join the conversation.

  • uconn_1965
  • Offline
  • Moderator
  • Registered
More
09 Jul 2020 17:35 #40486 by uconn_1965
Replied by uconn_1965 on topic Thermostat
I found that the 153 degree or 160 degree are the best. If you use theses thermostats and your Cord runs hot, you have another problem, it’s not the thermostats.

Please Log in or Create an account to join the conversation.

  • 1748 S
  • Topic Author
  • Offline
  • Platinum Forum User
  • Registered
More
09 Jul 2020 16:12 #40485 by 1748 S
Thermostat was created by 1748 S
I recall this subject being talked about but my search tells me nothing.
What is the preferred thermostat tep? I do recall it was to run both thermostats but use the low temp type. Am not sure if the "normal" temp units were 180 degrees or not. Thanks...


Gary Parsons

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum