New Membership Platform: Membee

The ACD Club is rolling out a new online membership system. All ACD Club Members should have receivied an email with enrollment instructions. You will use your email address as your login, and select a new password. This account will be used to renew your membership, update membership information, and make changes to your membership record.


This account is NOT THE SAME as your current account which you use to access the ACD Website Forums. Please continue to log into the Forums with the same username and password as you have always used. In the future we may consolidate the two accounts.

1936 Auburn Sheet Metal

  • Sheldon
  • Sheldon's Avatar Topic Author
  • Offline
  • Forum User
  • Forum User
More
05 Feb 2019 03:13 #36600 by Sheldon
1936 Auburn Sheet Metal was created by Sheldon
Hi All...we are doing metal work on Dad's 852 rumbleat ragtop....if anyone has any input as to how the rectangular area of the floor at the sides between the B-pillar and the rear fender well would have been done originally that would be really appreciated.....its the tan coloured area in the photo....Thanks! Sheldon
Attachments:

Please Log in or Create an account to join the conversation.

More
05 Feb 2019 22:15 - 05 Feb 2019 22:18 #36601 by yorkgulch
Replied by yorkgulch on topic 1936 Auburn Sheet Metal
Sheldon It looks like this. Note last pic is looking from inside fender well note the gap. Mine was filled with sound deadener.
Craig

Auburn 851
Attachments:
Last edit: 05 Feb 2019 22:18 by yorkgulch. Reason: Correct

Please Log in or Create an account to join the conversation.

  • Sheldon
  • Sheldon's Avatar Topic Author
  • Offline
  • Forum User
  • Forum User
More
05 Feb 2019 22:28 #36602 by Sheldon
Replied by Sheldon on topic 1936 Auburn Sheet Metal
Fantastic pics....Thank You!!!!!!!!!!!!

Please Log in or Create an account to join the conversation.

More
06 Feb 2019 01:42 - 06 Feb 2019 01:43 #36604 by yorkgulch
Replied by yorkgulch on topic 1936 Auburn Sheet Metal
I'm happy that helped! If you have made a rear floor pan I'm looking for one.

Auburn 851
Last edit: 06 Feb 2019 01:43 by yorkgulch.

Please Log in or Create an account to join the conversation.

Time to create page: 0.185 seconds
Powered by Kunena Forum