Bumpers for 34-36 Auburn

Curt Schulze
Offline
Moderator
Registered

12 Apr 2008 12:48 #9865 by Curt Schulze

Replied by Curt Schulze on topic Bumpers

Bumpers that are VERY similar to Auburn are 1935 36 Hudson and possibly Terraplane. A square hole in the center and two bolt holes on each end are the easy way to spot them. I have also noticed that the eight cylinder bumper on my 850Y is slightly higher and thicker than the bumpers on my 851's and 852's This becomes noticible when installing bumper guards.

The bitterness of poor quality remains long after the sweetness of low price is forgotten.
Be of Good Cheer
Curt

Please Log in or Create an account to join the conversation.

MICHAEL S SMITH
Offline
ACD Club Life Member
Registered

11 Apr 2008 05:39 #9860 by MICHAEL S SMITH

Replied by MICHAEL S SMITH on topic Bumpers for 34-36 Auburn

The narrower bumper is probably from a six cylinder car.

MICHAEL S SMITH ACD LIFE MEMBER #40
851 auburn phaeton
851 auburn sedan
810 cord westchester
812 cord phaeton(ex Tressler Swiss)
812 cord custom s/c beverly
812 cord s/c cabriolet
812 cord s/c beverly
80 866 speedster (pray factory built)

Please Log in or Create an account to join the conversation.

mikespeed35
Offline
ACD Club Life Member
Registered

11 Apr 2008 03:54 #9859 by mikespeed35

Replied by mikespeed35 on topic Bumpers for 34-36 Auburn

My 35 bumper is 4.5 also.
CORDially Mike

Mike Huffman

Please Log in or Create an account to join the conversation.

ilikescars
Offline
Moderator
Registered

10 Apr 2008 14:48 #9848 by ilikescars

Replied by ilikescars on topic Dip

My 35 speedster has a 4 1/4" wide bumper with a 5" dip in the center.
(Front bumper). Maybe your narrower bumper is from a different make, possibly Ford?

Mark

Please Log in or Create an account to join the conversation.

Terry
Topic Author
Offline
Moderator
Registered

10 Apr 2008 02:02 #9847 by Terry

Replied by Terry on topic Bumpers

I guess no one in the club knows the answer or do not want to reply to it.

Please Log in or Create an account to join the conversation.

Terry
Topic Author
Offline
Moderator
Registered

08 Apr 2008 00:27 #9833 by Terry

Bumpers for 34-36 Auburn was created by Terry

Is there a difference of the front bumper dip between the 3.5 and 4" bumpers.
I have measured two different bumpers in the center and the 3 1/5" bumper had a dip of about 2 inches and the 4" bumper had a dip of about 4.5". Is this normal for the two of them or were they all the same.Can someone straighten me out on this ! It is puzzling to me which one is right or wrong.

Please Log in or Create an account to join the conversation.