- Posts: 44
- Thank you received: 5
Wanted Machining instructions for 34 to 36 Auburn Water Pump using new type seal
- Terry
- Topic Author
- Offline
- Moderator
-
Registered
Less
More
27 Nov 2021 02:28 #44337
by Terry
Replied by Terry on topic Wanted Machining instructions for 34 to 36 Auburn Water Pump using new type seal
I appreciate the pages you uploaded but when I went to print them the resolution was to low to make a quality picture or printed pages.
Pete Kelly did send me the pages also in higher resolution and they will print out fine. I want to thank you both for helping another member . Terry
Pete Kelly did send me the pages also in higher resolution and they will print out fine. I want to thank you both for helping another member . Terry
Please Log in or Create an account to join the conversation.
- prattm
- Offline
- Moderator
-
Registered
Less
More
- Posts: 74
- Thank you received: 2
26 Nov 2021 14:50 #44330
by prattm
Replied by prattm on topic Wanted Machining instructions for 34 to 36 Auburn Water Pump using new type seal
Terry
I uploaded all the pages you ask for in that particular post.
MP
I uploaded all the pages you ask for in that particular post.
MP
Please Log in or Create an account to join the conversation.
- rlwardne
- Offline
- Senior Forum User
-
Registered
Less
More
- Posts: 69
- Thank you received: 14
22 Nov 2021 03:38 #44314
by rlwardne
Replied by rlwardne on topic Wanted Machining instructions for 34 to 36 Auburn Water Pump using new type seal
I took mine to the local machine shop. He figured it right out and no leaks. This mating surfaces pretty bad ?
Please Log in or Create an account to join the conversation.
- Terry
- Topic Author
- Offline
- Moderator
-
Registered
Less
More
- Posts: 44
- Thank you received: 5
21 Nov 2021 23:35 #44313
by Terry
Wanted Machining instructions for 34 to 36 Auburn Water Pump using new type seal was created by Terry
Looking for instructions using a new style water pump seal. I think Mike Speed posted this a few years ago. Also still looking for pages 14 and 74 from the May 1934 Auburn Parts list manual. The prints should come from an origional manual as the reprinted manual comes out fuzzy.
Please Log in or Create an account to join the conversation.