8/10 Vapor Lock

  • pneflyer
  • pneflyer's Avatar Topic Author
  • Offline
  • ACD Club Member
  • ACD Club Member
More
08 Jul 2019 13:28 #37705 by pneflyer
Replied by pneflyer on topic 8/10 Vapor Lock
Replaced

Please Log in or Create an account to join the conversation.

More
08 Jul 2019 14:34 #37706 by 1748 S
Replied by 1748 S on topic 8/10 Vapor Lock
Have you noticed the engine running hotter than normal? I know its air cooled but sometimes the belt will loosen up.Then it slips so the fan is not pulling all the air for cooling. The design on this belt is very suspect.It is not running "normally thru the pulleys. It has to twist coming off the crank at the change of direction before it reaches the fan on top of the flat 6 engines. Might even change the belt just because it may not have been changed in a long time. V belts can look fine but are well worn out.


Gary Parsons

Please Log in or Create an account to join the conversation.

Time to create page: 0.104 seconds
Powered by Kunena Forum