New Membership Platform: Membee

The ACD Club is rolling out a new online membership system. All ACD Club Members should have receivied an email with enrollment instructions. You will use your email address as your login, and select a new password. This account will be used to renew your membership, update membership information, and make changes to your membership record.


This account is NOT THE SAME as your current account which you use to access the ACD Website Forums. Please continue to log into the Forums with the same username and password as you have always used. In the future we may consolidate the two accounts.

1933 Salon Model Horns

More
13 Oct 2021 23:06 #44098 by pete kelly
Replied by pete kelly on topic 1933 Salon Model Horns
Hi Curt
Yes the horns on the splash apron is correct for '33 8-105 Auburns only.
Pete
The following user(s) said Thank You: Justin Kerns

Please Log in or Create an account to join the conversation.

More
14 Oct 2021 13:12 #44103 by Curt Schulze
Replied by Curt Schulze on topic 1933 Salon Model Horns
Thanks Pete, I learn something new every day.

The bitterness of poor quality remains long after the sweetness of low price is forgotten.
Be of Good Cheer
Curt

Please Log in or Create an account to join the conversation.

  • DONALD.ELMER
  • Topic Author
  • Offline
  • Forum Contributor
  • Forum Contributor
More
22 Oct 2021 02:33 #44159 by DONALD.ELMER
Replied by DONALD.ELMER on topic 1933 Salon Model Horns
The good news: the horn set from Pete arrived and both work and are in good shape. I need one horn screen and I'll be all set. Now for my question... there is a hole at the back of the horn mechanism cover... what is this hole for??

Please Log in or Create an account to join the conversation.

More
22 Oct 2021 03:34 #44160 by 1748 S
Replied by 1748 S on topic 1933 Salon Model Horns
Might be the hole reason is for the electrical feed line to the internals so the horn works?? On the back bell of my 4 Cord horns is a notch where the power wire runs to the internal coil.


Gary Parsons

Please Log in or Create an account to join the conversation.

  • DONALD.ELMER
  • Topic Author
  • Offline
  • Forum Contributor
  • Forum Contributor
More
25 Oct 2021 17:43 #44175 by DONALD.ELMER
Replied by DONALD.ELMER on topic 1933 Salon Model Horns
It seems that the hole on the rear of the dome cover is for the screw that anchors that dome to the horn mechanism

Please Log in or Create an account to join the conversation.

Time to create page: 0.120 seconds
Powered by Kunena Forum