1936 Cord parts

Sorry I was not able to id the plate. I don't see how it can fit our engines either. As for the last pic I misssed that one but am happy I know what it is now. My 37 has Bendix brakes so I will be looking for this part when I get that far along.

Thank you!

All the pictures are correctly identified as is the last. The last is the bell crank for the hand brake. It was been modified by the factory when they installed Bendix brakes, which most 1937 Cord had. You can see that the arm has been sawn off as it didn't need to be so long.

The last picture appears to be the emergency brake bell crank that connects the handbrake cable to the rear hub cables.

Top pic is a plate that does not fit our Cord engine but its for some other engine. Second pic is the generator adjusting bracket. Third pic is the head light turning mechinism that fits thru the corners of the dash and the crank handles attaches to it. On the back side of the dash the head light raise and lower crank cables connects to it and then connects to the head light doord in the fenders. The last pic is part of the foot throttle linkage.

Need some help identifying these Cord parts.

Thanks