Skip to main content

Crosley Radio finish

  • pneflyer
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
14 Sep 2023 14:25 #47727 by pneflyer
Replied by pneflyer on topic Crosley Radio finish
Thank you everyone for your input.

Mitch

Please Log in or Create an account to join the conversation.

  • pete kelly
  • Offline
  • Moderator
  • Registered
More
14 Sep 2023 14:12 #47726 by pete kelly
Replied by pete kelly on topic Crosley Radio finish
 
For Cord 810-812
Light brown wrinkle finish

Please Log in or Create an account to join the conversation.

  • Curt Schulze
  • Offline
  • Moderator
  • Registered
More
14 Sep 2023 13:39 #47725 by Curt Schulze
Replied by Curt Schulze on topic Crosley Radio finish
Crisley radios used in all 34-36 Auburns have black wrinkle finish.

The bitterness of poor quality remains long after the sweetness of low price is forgotten.
Be of Good Cheer
Curt

Please Log in or Create an account to join the conversation.

  • pneflyer
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
14 Sep 2023 00:47 #47722 by pneflyer
Replied by pneflyer on topic Crosley Radio finish
Thanks Terry

Please Log in or Create an account to join the conversation.

  • Terry Cockerell
  • Offline
  • Elite Forum User
  • Registered
More
14 Sep 2023 00:42 #47721 by Terry Cockerell
Replied by Terry Cockerell on topic Crosley Radio finish
Mitch as far as I am aware the colour was a light brown with a textured finish, not exactly a hammer tone finish.
Check out the attached pictures. I kept the original finish as I could not find a suitable replacement.

I have not been able to add the pictures. I will send an email with them.

T cockerell

Please Log in or Create an account to join the conversation.

  • pneflyer
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
14 Sep 2023 00:08 #47720 by pneflyer
Crosley Radio finish was created by pneflyer
Hello all,

Is the finish of the Crosley radios in the early cars hammered black or hammered gray?

Thanks,

Mitch

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum