Skip to main content

cmpass

  • Terry Cockerell
  • Offline
  • Elite Forum User
  • Registered
More
16 Aug 2023 22:19 - 19 Aug 2023 01:14 #47580 by Terry Cockerell
Replied by Terry Cockerell on topic cmpass
I agree the compass in the short film clip is not a Cord Accessory. A picture of the accessory booklet is attached. I believe the Cord Accessory Compass is extremely rare and that there is an even rarer illuminated model thanks to information supplied by Pete Kelly.I made one from photographs and help from members then upgraded it to super rare illuminated model. Mine has all the correct internals but I have not managed to get it to work as it is close to the metal frame between the windshields as well as the windshields. Maybe one day I will get it sorted. It certainly looks ok.
The last picture shows an original compass fitted in a phaeton.

.  

T cockerell
Last edit: 19 Aug 2023 01:14 by Terry Cockerell. Reason: Adding pictures & revising text
The following user(s) said Thank You: 1748 S, ShanghaiJack

Please Log in or Create an account to join the conversation.

  • John Meredith
  • Offline
  • Senior Forum User
  • Registered
More
16 Aug 2023 19:34 #47579 by John Meredith
Replied by John Meredith on topic cmpass
Pete,

You are correct, once again. not a n original Cord accessory.

Please Log in or Create an account to join the conversation.

  • pete kelly
  • Offline
  • Moderator
  • Registered
More
16 Aug 2023 19:25 #47578 by pete kelly
Replied by pete kelly on topic cmpass
Not original Cord.
It should be filled with mineral oil not water.
See me at Auburn for a detailed explanation/expose.
Pete

Please Log in or Create an account to join the conversation.

  • balinwire
  • Topic Author
  • Offline
  • Premium Forum User
  • Registered
More
16 Aug 2023 16:22 - 16 Aug 2023 17:01 #47577 by balinwire
Replied by balinwire on topic cmpass
 I have never opened it up. It may be simple but it might have jeweled bearings and complexity of a Rolex watch. This would be a good limited club project of 100 pieces.
Last edit: 16 Aug 2023 17:01 by balinwire.

Please Log in or Create an account to join the conversation.

  • John Meredith
  • Offline
  • Senior Forum User
  • Registered
More
16 Aug 2023 11:03 #47576 by John Meredith
Replied by John Meredith on topic cmpass
Any chance that the compass body and supports could be copied and machined?

Please Log in or Create an account to join the conversation.

  • balinwire
  • Topic Author
  • Offline
  • Premium Forum User
  • Registered
More
16 Aug 2023 06:08 - 16 Aug 2023 15:54 #47575 by balinwire
Compass was created by balinwire
I hope this link works, my 1936 GPS, ha-ah, the water is still in it and it moves north, surviving many freezes.
www.facebook.com/stories/166864018654295...0Mg==/?view_single=1
Last edit: 16 Aug 2023 15:54 by Joe Holderman.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum