- Posts: 259
- Thank you received: 44
Center Header Bow latch question
- wynlaidig
- Offline
- ACD Club Life Member
-
Registered
Less
More
06 Feb 2023 02:42 #46773
by wynlaidig
Replied by wynlaidig on topic Center Header Bow latch question
I have a later 1937 phaeton which has the original header and all the latch backing plates are indented exactly the same as in the 1936 models.
Please Log in or Create an account to join the conversation.
- THOMAS.BRETHAUER
- Offline
- Non-Member
-
Registered
Less
More
- Posts: 2
- Thank you received: 0
19 Jan 2023 21:44 #46699
by THOMAS.BRETHAUER
Replied by THOMAS.BRETHAUER on topic Center Header Bow latch question
Here is a picture of my whole assembly, latch plus brass plate. My brass plate is not inset into the header, but it is a 1937. Plate measures 5 x 1 3/4 x 1/4 inch.
Please Log in or Create an account to join the conversation.
- Terry Cockerell
- Offline
- Elite Forum User
-
Registered
Less
More
- Posts: 1344
- Thank you received: 305
19 Jan 2023 19:32 #46698
by Terry Cockerell
T cockerell
Replied by Terry Cockerell on topic Center Header Bow latch question
Tom that is the part I have a Factory drawing of. I can try taking a photograph of the picture then uploading it to the Forum.
T cockerell
Please Log in or Create an account to join the conversation.
- Thomas Wilcock
- Offline
- Senior Forum User
-
Registered
Less
More
- Posts: 90
- Thank you received: 9
19 Jan 2023 12:45 #46697
by Thomas Wilcock
Replied by Thomas Wilcock on topic Center Header Bow latch question
Please Log in or Create an account to join the conversation.
- Terry Cockerell
- Offline
- Elite Forum User
-
Registered
Less
More
- Posts: 1344
- Thank you received: 305
19 Jan 2023 08:31 - 19 Jan 2023 08:36 #46696
by Terry Cockerell
T cockerell
Replied by Terry Cockerell on topic Center Header Bow latch question
This is probably the brass plate referred to.
Sorry the file will not open when I attach it.
Sorry the file will not open when I attach it.
T cockerell
Last edit: 19 Jan 2023 08:36 by Terry Cockerell. Reason: Adding drawing
Please Log in or Create an account to join the conversation.
- pete kelly
- Offline
- Moderator
-
Registered
Less
More
- Posts: 493
- Thank you received: 118
15 Jan 2023 13:11 #46684
by pete kelly
Replied by pete kelly on topic Center Header Bow latch question
The latch is correct but there is a larger brass plate to which it attaches.
The following user(s) said Thank You: 1748 S, wolfpline
Please Log in or Create an account to join the conversation.
- Terry Cockerell
- Offline
- Elite Forum User
-
Registered
Less
More
- Posts: 1344
- Thank you received: 305
15 Jan 2023 03:16 #46683
by Terry Cockerell
T cockerell
Replied by Terry Cockerell on topic Center Header Bow latch question
I don't have a phaeton but do have some copies of Factory drawings that were taken over by the Hupmobile Company.
Attached is a drawing of the latch which appears to be identical to yours.
Attached is a drawing of the latch which appears to be identical to yours.
T cockerell
The following user(s) said Thank You: wolfpline
Please Log in or Create an account to join the conversation.
- wolfpline
- Topic Author
- Offline
- Senior Forum User
-
Registered
Less
More
- Posts: 27
- Thank you received: 0
15 Jan 2023 02:55 - 15 Jan 2023 02:55 #46681
by wolfpline
Center Header Bow latch question was created by wolfpline
Last edit: 15 Jan 2023 02:55 by wolfpline.
Please Log in or Create an account to join the conversation.