- Posts: 94
- Thank you received: 6
Manuals
- AuburnNut
- Offline
- Moderator
-
Registered
Less
More
05 Dec 2023 12:53 #48054
by AuburnNut
Replied by AuburnNut on topic Manuals
You can contact Mark Tyra by emailing [email protected]
That email appears in marks website which is www.auburnspeedsters.com
“Jimbo”, you say to Curt “where can you buy parts for these replicas…I’ve tried everywhere”…..well the short answer is that every speedster replica is different and parts are sourced from different car manufacturers and different models. My car has an engine from a mid 1970’s Ford and the suspension matches that. I would suggest you find out exactly what engine you have, by researching that first and then see for related parts if they have the same year and model by matching parts visually
Good former replica owners will have done this already and should have shared that when you bought the car
That email appears in marks website which is www.auburnspeedsters.com
“Jimbo”, you say to Curt “where can you buy parts for these replicas…I’ve tried everywhere”…..well the short answer is that every speedster replica is different and parts are sourced from different car manufacturers and different models. My car has an engine from a mid 1970’s Ford and the suspension matches that. I would suggest you find out exactly what engine you have, by researching that first and then see for related parts if they have the same year and model by matching parts visually
Good former replica owners will have done this already and should have shared that when you bought the car
Please Log in or Create an account to join the conversation.
- pfree3233
- Offline
- Moderator
-
Registered
Less
More
- Posts: 99
- Thank you received: 7
05 Dec 2023 02:28 #48053
by pfree3233
Replied by pfree3233 on topic Manuals
I'm not sure if this is who Kurt is talking about but it may get you pointed in the right direction.
As for parts, depending on what you need, I have gotten to the point where I'm pretty much making everything I need for my speedster. Hope this helps. Pat
www.auburnspeedsters.com/classifieds.htm
As for parts, depending on what you need, I have gotten to the point where I'm pretty much making everything I need for my speedster. Hope this helps. Pat
www.auburnspeedsters.com/classifieds.htm
Please Log in or Create an account to join the conversation.
- Jimbo409
- Topic Author
- Offline
- Non-Member
-
Registered
Less
More
- Posts: 8
- Thank you received: 0
06 Nov 2023 16:06 #47933
by Jimbo409
Replied by Jimbo409 on topic Manuals
Curt do you have his number and email. Also where can you buy parts for these replicas I’ve looked everywhere
Please Log in or Create an account to join the conversation.
- Jimbo409
- Topic Author
- Offline
- Non-Member
-
Registered
Less
More
- Posts: 8
- Thank you received: 0
06 Nov 2023 15:55 #47932
by Jimbo409
Replied by Jimbo409 on topic Manuals
Does anyone have mike Tyra phone number and email address
Please Log in or Create an account to join the conversation.
- Curt Schulze
- Offline
- Moderator
-
Registered
Less
More
- Posts: 1014
- Thank you received: 140
06 Nov 2023 14:02 #47931
by Curt Schulze
The bitterness of poor quality remains long after the sweetness of low price is forgotten.
Be of Good Cheer
Curt
Replied by Curt Schulze on topic Manuals
You might try milestone motorcars on line. Mark Tyra owns that site. Mark is in the ACD directory.
The bitterness of poor quality remains long after the sweetness of low price is forgotten.
Be of Good Cheer
Curt
The following user(s) said Thank You: Jimbo409
Please Log in or Create an account to join the conversation.
- Jimbo409
- Topic Author
- Offline
- Non-Member
-
Registered
Less
More
- Posts: 8
- Thank you received: 0
05 Nov 2023 14:54 #47928
by Jimbo409
Manuals was created by Jimbo409
I just bought a speedster replica made by Royal in Michigan, doe anyone know where I can by a assembly manual and parts for this car
it has a 1970 ford ltd frame and ford 400 cu in engine,thank you for any information
it has a 1970 ford ltd frame and ford 400 cu in engine,thank you for any information
Please Log in or Create an account to join the conversation.