Oil Pressure Regulator

  • Neal Ziff
  • Neal Ziff's Avatar Topic Author
  • Offline
  • ACD Club Member
  • ACD Club Member
21 Jan 2010 01:47 #15629 by Neal Ziff
Neal Ziff created the topic: Oil Pressure Regulator
On my '30 8-95 I'm not getting any oil pressure reading on the gauge so I removed the oil pressure regulator to clean it out and check for problems, etc. I was able to take off just about everything, except the plunger within. In its day they must have had a problem here as the cylindrical shaped air chamber on top has been brazed on instead of just screwed in. So, I can't access the plunger from the top. I can see it from the bottom after I removed the large plug that is the base for the springs. Can I remove the plunger from the bottom? Does anyone have a schematic for this part?

I also plan on draining the oil and removing and checking the oil pump. Any suggestions regarding this would also be appreciated.
Thanks, Neal

1930 8-95 Cabriolet

Please Log in or Create an account to join the conversation.

22 Jan 2010 00:12 #15640 by RandyEma
RandyEma replied the topic:
Neal Call me Randy

Please Log in or Create an account to join the conversation.

Moderators: Joe Holderman
Time to create page: 0.074 seconds
Powered by Kunena Forum