Skip to main content

Trunk interior

  • johnmereness
  • Offline
  • Moderator
  • Registered
More
29 Oct 2019 05:24 #38722 by johnmereness
Replied by johnmereness on topic Trunk interior
Thanks Tim ! I hope you do not mind, I moved your photos and text over to the trunk page started a few days ago. Interestingly, the strap looks to be made of a different material than an Auburn (I will have to look more close). I think the buckle on the tool strap may be partially bent. Sidenote: Tim's car was my first ride in 36/37 Cord.

JMM

Please Log in or Create an account to join the conversation.

  • Tim Gilmartin
  • Topic Author
  • Offline
  • ACD Club Past President
  • Registered
More
28 Oct 2019 16:32 #38718 by Tim Gilmartin
Replied by Tim Gilmartin on topic Trunk interior
Picture of gas fill tube covering; note rust from wires that held it on the tube. Jack hold down straps with flat washers still stuck to the webbing.
Attachments:
The following user(s) said Thank You: johnmereness

Please Log in or Create an account to join the conversation.

  • Tim Gilmartin
  • Topic Author
  • Offline
  • ACD Club Past President
  • Registered
More
28 Oct 2019 16:04 #38717 by Tim Gilmartin
Replied by Tim Gilmartin on topic Trunk interior
Picture of backing material for the burlap; note faint outline of the “x” cross member of the back seat. Burlap with finer lines. Non burlap lined material was on the trunk side of the gas fill tube cloth wrap. The gas fill tube side is a tan/olive drab color.
Tim.

Please Log in or Create an account to join the conversation.

  • Tim Gilmartin
  • Topic Author
  • Offline
  • ACD Club Past President
  • Registered
More
28 Oct 2019 15:58 #38716 by Tim Gilmartin
Trunk interior was created by Tim Gilmartin
Here are some pics of my trunk material as found on my Westchester in 1992. I have no reason to believe that this is not original material.
Attachments:

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum