- Posts: 150
- Thank you received: 19
Bustle Trunk Seal
- balinwire
- Offline
- Premium Forum User
-
Registered
Less
More
14 Feb 2019 22:06 #36643
by balinwire
Replied by balinwire on topic Bustle Trunk Seal
Great link, what one looks like a good fit for Bustle trunk. also correct window felt channels and front hood felt pad.
stores.restorationspecialties.com/closed...t=bestselling&page=1
stores.restorationspecialties.com/closed...t=bestselling&page=1
Please Log in or Create an account to join the conversation.
- Cordura
- Offline
- Non-Member
-
Registered
Less
More
- Posts: 15
- Thank you received: 9
14 Feb 2019 18:56 #36641
by Cordura
Replied by Cordura on topic Bustle Trunk Seal
wynlaidig, Call me 406 842 7655, I can probably find you the proper seal rubber from an after-market supplier. Peter Morgan
Please Log in or Create an account to join the conversation.
- wynlaidig
- Topic Author
- Offline
- ACD Club Life Member
-
Registered
Less
More
- Posts: 259
- Thank you received: 44
14 Feb 2019 12:53 #36640
by wynlaidig
Replied by wynlaidig on topic Bustle Trunk Seal
The 13mm dim on your Westchester is the standard 1/2" size that is used on the Cabr and Phaeton trucks as well. But that size is too small for the Bustle trunk on the Custom Beverly. It has to be more like 3/4" to work. The metal lip around the trunk is just too tall for a 1/2" seal.
Please Log in or Create an account to join the conversation.
- Terry Cockerell
- Offline
- Elite Forum User
-
Registered
Less
More
- Posts: 1338
- Thank you received: 302
14 Feb 2019 08:00 #36639
by Terry Cockerell
Please Log in or Create an account to join the conversation.
- 1748 S
- Offline
- Platinum Forum User
-
Registered
Less
More
- Posts: 1745
- Thank you received: 134
14 Feb 2019 04:25 #36638
by 1748 S
Replied by 1748 S on topic Bustle Trunk Seal
Thanks Terry. That helps me so much. I can find something with those dimensions for sure.
Gary Parsons
Gary Parsons
Please Log in or Create an account to join the conversation.
- Terry Cockerell
- Offline
- Elite Forum User
-
Registered
Less
More
- Posts: 1338
- Thank you received: 302
14 Feb 2019 03:53 #36637
by Terry Cockerell
T cockerell
Replied by Terry Cockerell on topic Bustle Trunk Seal
The Westchester trunk seal is D shaped and measures 13 mm x 13 mm with a 6 mm hole in the middle. The flat base is pre-glued with a tear off strip.
Hope this helps.
Hope this helps.
T cockerell
The following user(s) said Thank You: 1748 S
Please Log in or Create an account to join the conversation.
- Terry Cockerell
- Offline
- Elite Forum User
-
Registered
Less
More
- Posts: 1338
- Thank you received: 302
13 Feb 2019 20:48 #36634
by Terry Cockerell
T cockerell
Replied by Terry Cockerell on topic Bustle Trunk Seal
I will check the dimensions of the D section used on my Westchester and let you know. I am sure there will be a supplier of an equivalent out there. I will ley you know later today ............................ I am in Australia.
Cheers,
Terry
Cheers,
Terry
T cockerell
Please Log in or Create an account to join the conversation.
- wynlaidig
- Topic Author
- Offline
- ACD Club Life Member
-
Registered
Less
More
- Posts: 259
- Thank you received: 44
13 Feb 2019 12:41 #36631
by wynlaidig
Replied by wynlaidig on topic Bustle Trunk Seal
No he doesn't have any. He has the smaller half round for the open cars but it is too small for the bustle trunk. If it's the same hollow D profile but just larger I can find it somewhere. I just didn't know for sure what it was supposed to be. Just knew the smaller open car seal didn't fit.
Please Log in or Create an account to join the conversation.
- Terry Cockerell
- Offline
- Elite Forum User
-
Registered
Less
More
- Posts: 1338
- Thank you received: 302
13 Feb 2019 08:31 #36629
by Terry Cockerell
T cockerell
Replied by Terry Cockerell on topic Bustle Trunk Seal
Stan should have this at AC Parts in Kansas. I would assume it has the same cross section as used on Westchesters .................... a hollow D section with a pre-glued flat side.
T cockerell
Please Log in or Create an account to join the conversation.
- wynlaidig
- Topic Author
- Offline
- ACD Club Life Member
-
Registered
Less
More
- Posts: 259
- Thank you received: 44
13 Feb 2019 02:17 #36627
by wynlaidig
Bustle Trunk Seal was created by wynlaidig
Can someone show me what profile seal should be on the bustle trunk? There is nothing on my car, and i am not sure what seal to use, or how it mounts.
Please Log in or Create an account to join the conversation.