- Posts: 50
- Thank you received: 5
Driver side rear view mirror
- Tom_Parkinson
- Offline
- Moderator
-
Registered
Less
More
10 Jan 2017 15:04 #32244
by Tom_Parkinson
With brakes, two cylinders are better than one.
Editor-in-Chief Emeritus, The Hardtop News Magazine, the Journal of the Michiana Dunes Region, Lambda Car Club International
See pix of 1509A here: mbcurl.me/YCSE
Replied by Tom_Parkinson on topic Driver side rear view mirror
Hi,
Also, what mirror works on the passenger side? The one I got will not adjust enough to let me see anything.
--Tom
Also, what mirror works on the passenger side? The one I got will not adjust enough to let me see anything.
--Tom
With brakes, two cylinders are better than one.
Editor-in-Chief Emeritus, The Hardtop News Magazine, the Journal of the Michiana Dunes Region, Lambda Car Club International
See pix of 1509A here: mbcurl.me/YCSE
Please Log in or Create an account to join the conversation.
- wcoye
- Topic Author
- Offline
- Moderator
-
Registered
Less
More
- Posts: 267
- Thank you received: 6
10 Jan 2017 04:13 #32237
by wcoye
Bill Coye
Westchester 2240A
Brag line: Winner of the
2014 Hillsborough Concurs Strother MacMinn award
Driver side rear view mirror was created by wcoye
When I bought my Westchester the former owner had mounted a rvm that looked like it came off a 1970's pickup. I did a fairly good job but looked awful. I replaced it with a round mirror that mounts to the door edge with set screws. It looks okay but does not adjust so I can see anything. I've seen many photos of 810's with excellent looking aftermarket door mounted rvm. Where do you find these things?
Bill Coye
Westchester 2240A
Brag line: Winner of the
2014 Hillsborough Concurs Strother MacMinn award
Please Log in or Create an account to join the conversation.