Skip to main content

Top fasteners

  • Auburn/Cord Parts
  • Offline
  • ACD Club Life Member
  • Registered
More
15 Apr 2004 14:10 #1586 by Auburn/Cord Parts
Replied by Auburn/Cord Parts on topic RE: Top Fasteners
Russell-

The qtr. windows and top irons use "Durable" #XX10376 stud type snaps along the edge of the top or hood. Matching female snaps are located on a skirt sewn to the top covering so they do not show along the outside. The rear curtain has "cinch" #63301 and #6335 push button stud fasteners at the top and bottom with "cinch" eyelets and washers in the curtain. There are a couple of the "Durable" fasteners on each side of the curtain along with a weather flap. The lower curtain fasteners usually show but all others do not show.

Stan

Auburn/Cord Parts, Inc. P.O. Box 547 1400 N. "A" St. Wellington, KS 67152 (620) 326-7751 This email address is being protected from spambots. You need JavaScript enabled to view it.

Please Log in or Create an account to join the conversation.

  • Russell Colman
  • Topic Author
  • Visitor
  • Guest
14 Apr 2004 02:16 #1574 by Russell Colman
Top fasteners was created by Russell Colman
Can anyone tell me the type of fasteners that were used on the tops of the Cord phaetons and convertibles, i.e. to fix the fabric top to the quarter window frames, to fix the top to the hood irons over the wind-down window and to connect the back flap holding the window to the main part of the top? Thanks

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum