- Posts: 34
- Thank you received: 0
Exhaust Manifolds for a 812SC Wanted/Engine hardware?
- e merancy
- Offline
- Moderator
-
Registered
Less
More
17 Mar 2007 22:50 #6593
by e merancy
e.merancy emailThis email address is being protected from spambots. You need JavaScript enabled to view it.
Replied by e merancy on topic S/C exhaust manifolds
See item # 190093390719 on EBay they look pretty good to me Good Luck Ed.M.
e.merancy email
Please Log in or Create an account to join the conversation.
- Mark Tomei
- Topic Author
- Offline
- Moderator
-
Registered
Less
More
- Posts: 6
- Thank you received: 2
12 Mar 2007 05:41 #6553
by Mark Tomei
Replied by Mark Tomei on topic Exhaust Manifolds for a 812SC Wanted/Engine hardware?
Thanks for the information . I am hoping also on the nut and bolt front that there might be a simpler idea than machining new ones myself.
Please Log in or Create an account to join the conversation.
- hportz
- Offline
- Moderator
-
Registered
Less
More
- Posts: 2
- Thank you received: 0
12 Mar 2007 03:42 #6552
by hportz
www.portzcordz.com (photos)
Replied by hportz on topic S/c exhaust manifolds
Your 2nd question; go to ACD Club Forum Index "Judging Information"
www.portzcordz.com (photos)
Please Log in or Create an account to join the conversation.
- hportz
- Offline
- Moderator
-
Registered
Less
More
- Posts: 2
- Thank you received: 0
12 Mar 2007 03:30 #6550
by hportz
www.portzcordz.com (photos)
Replied by hportz on topic S/C exhaust manifolds
You can get the manifolds from Don Simmons & sst'l exhaust system if you like. 519-485-1966
www.portzcordz.com (photos)
Please Log in or Create an account to join the conversation.
- Mark Tomei
- Topic Author
- Offline
- Moderator
-
Registered
Less
More
- Posts: 6
- Thank you received: 2
11 Mar 2007 05:45 #6547
by Mark Tomei
Exhaust Manifolds for a 812SC Wanted/Engine hardware? was created by Mark Tomei
Can anyone help me on where I might find a set of '37 812 SC outside pipe Phaeton exhaust manifolds?
One last question for now on the esoteric side; Are the correct bolts used for the exposed engine assembly available? Is there a judging standard that I should attain?
I think the Forum you folks have is splendid. Actually, it's the only place I have found that actually, collectively, knows anything for certain about these cars!
[/code]
One last question for now on the esoteric side; Are the correct bolts used for the exposed engine assembly available? Is there a judging standard that I should attain?
I think the Forum you folks have is splendid. Actually, it's the only place I have found that actually, collectively, knows anything for certain about these cars!
[/code]
Please Log in or Create an account to join the conversation.