New Membership Platform: Membee

The ACD Club is rolling out a new online membership system. All ACD Club Members should have receivied an email with enrollment instructions. You will use your email address as your login, and select a new password. This account will be used to renew your membership, update membership information, and make changes to your membership record.


This account is NOT THE SAME as your current account which you use to access the ACD Website Forums. Please continue to log into the Forums with the same username and password as you have always used. In the future we may consolidate the two accounts.

Seal

More
09 Aug 2021 00:25 #43651 by RKF
Seal was created by RKF
does anyone have info on where to acquire a front axel seal?
My old one says Fitzgerald 84211

Please Log in or Create an account to join the conversation.

More
09 Aug 2021 03:21 #43654 by 1748 S
Replied by 1748 S on topic Seal
I recall two different size seals for the front axles. But try to get the internal size where the shaft rides and the external size that fits the hub. That that and the old seal to any large bearing supplier and sak for help. I can search my records tomorrow for the size seals and part numbers I used.


Gary Parsons

Please Log in or Create an account to join the conversation.

  • JIM.OBRIEN
  • Offline
  • Frequent Forum Contributor
  • Frequent Forum Contributor
More
10 Aug 2021 01:06 #43663 by JIM.OBRIEN
Replied by JIM.OBRIEN on topic Seal
Which seal are you looking for? There on one in the front wheel bearing retaining nut, one in the outter CV joint bell and one on the inner CV joint housing.

Please Log in or Create an account to join the conversation.

More
10 Aug 2021 23:53 #43677 by RKF
Replied by RKF on topic Seal
The Seal that is pressed into the retaining ring that has notches that holds the wheel bearing in. It goes over the axle.

Please Log in or Create an account to join the conversation.

  • JIM.OBRIEN
  • Offline
  • Frequent Forum Contributor
  • Frequent Forum Contributor
More
11 Aug 2021 01:10 #43679 by JIM.OBRIEN
Replied by JIM.OBRIEN on topic Seal
There are several that will work. CR 21100, CR21103. They are the same ID and OD. CR 21100 ss .438" thick. CR 21103 is .375" thick.

Note: CR is Chicago Rawhide which is now owned by SKF.

Please Log in or Create an account to join the conversation.

More
11 Aug 2021 02:35 #43680 by balinwire
Replied by balinwire on topic Seal
glad you mention rawhide, there was a rubber seal on my hub spindle and it wore a channel in the surface. i suspected the leather was easier on the old alloys. Leather may not seal as well though with modern lube.

Please Log in or Create an account to join the conversation.

Time to create page: 0.116 seconds
Powered by Kunena Forum