Skip to main content

Clutch and Brake Pedal Return Springs

  • 1748 S
  • Offline
  • Platinum Member
  • Registered
More
03 Aug 2021 22:23 #43633 by 1748 S
Replied by 1748 S on topic Clutch and Brake Pedal Return Springs
Good question Terry. I purchased a replacement set of all the important springs from a former club member. I suspect I may have the original springs and will be watching the answers given.


Gary Parsons

Please Log in or Create an account to join the conversation.

  • Terry Cockerell
  • Topic Author
  • Offline
  • Elite Member
  • Registered
More
03 Aug 2021 21:45 #43632 by Terry Cockerell
Clutch and Brake Pedal Return Springs was created by Terry Cockerell
There seems to be a variety of spring set ups for the clutch and brake pedals.
I believe the original springs are fairly short and both are connected to the master cylinder support bracket.
Other variations use longer springs connected to the various anchor points.
Did the original short springs prove inadequate?
I would appreciate any comments and pictures.

T cockerell

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum