- Posts: 52
- Thank you received: 1
SHIFT SWITCH IN STEERING COLUM
- A.S. KOLLER
- Topic Author
- Offline
- Moderator
-
Registered
Less
More
25 Jun 2021 16:22 #43393
by A.S. KOLLER
Replied by A.S. KOLLER on topic SHIFT SWITCH IN STEERING COLUM
Thanks Jim,
I did speak to Pat and I am going to purchase one of his 3D printed blanks to install my parts on
Steve Koller
I did speak to Pat and I am going to purchase one of his 3D printed blanks to install my parts on
Steve Koller
Please Log in or Create an account to join the conversation.
- 1748 S
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 1738
- Thank you received: 134
19 Jun 2021 22:36 #43360
by 1748 S
Replied by 1748 S on topic SHIFT SWITCH IN STEERING COLUM
Contact any of these members. Stan Gilliand of ACD parts in Wellington Kansas. Pat Lehy in Indiana or Jim O'Brien in Ohio.
Gary Parsons
Gary Parsons
Please Log in or Create an account to join the conversation.
- A.S. KOLLER
- Topic Author
- Offline
- Moderator
-
Registered
Less
More
- Posts: 52
- Thank you received: 1
19 Jun 2021 17:28 #43359
by A.S. KOLLER
SHIFT SWITCH IN STEERING COLUM was created by A.S. KOLLER
Hi,
I am in desperate need of a new switch for my 37 Beverly or a good used one. (Or is that an oxymoron).
Any help would be appreciated
Steve Koller
I am in desperate need of a new switch for my 37 Beverly or a good used one. (Or is that an oxymoron).
Any help would be appreciated
Steve Koller
Please Log in or Create an account to join the conversation.