Skip to main content

Headlights stopped working

  • JEFF.SIGLER
  • Topic Author
  • Offline
  • Junior Member
  • Registered
More
02 Jun 2021 12:26 #43283 by JEFF.SIGLER
Replied by JEFF.SIGLER on topic Headlights stopped working
Thank you for the reply! I found the problem and now have lights!

Please Log in or Create an account to join the conversation.

  • JEFF.SIGLER
  • Topic Author
  • Offline
  • Junior Member
  • Registered
More
02 Jun 2021 12:26 #43282 by JEFF.SIGLER
Replied by JEFF.SIGLER on topic Headlights stopped working
I found the problem to be a short in the relay box cover. Now I have headlights!

Please Log in or Create an account to join the conversation.

  • JEFF.SIGLER
  • Topic Author
  • Offline
  • Junior Member
  • Registered
More
02 Jun 2021 12:24 #43281 by JEFF.SIGLER
Replied by JEFF.SIGLER on topic Headlights stopped working
Thank you for the reply. Shortly after posting my problem I found a short in the replay box cover. A little cork gasket material solved the problem!

Please Log in or Create an account to join the conversation.

  • pete kelly
  • Offline
  • Moderator
  • Registered
More
01 Jun 2021 22:23 #43274 by pete kelly
Replied by pete kelly on topic Headlights stopped working
NO GROUND

Please Log in or Create an account to join the conversation.

More
01 Jun 2021 22:21 #43273 by Ivor
Replied by Ivor on topic Headlights stopped working
Hello Jeff, you may have a poor connection in the switch or the wiring and when a load is applied it causes the volts drop to near zero. If you do not have time to trace the fault you could run a temporary circuit for your night time event.

Please Log in or Create an account to join the conversation.

  • JEFF.SIGLER
  • Topic Author
  • Offline
  • Junior Member
  • Registered
More
01 Jun 2021 21:22 #43272 by JEFF.SIGLER
Headlights stopped working was created by JEFF.SIGLER
My 810's headlights stopped working suddenly and I can't figure out the issue. I've purchased replacement 6v H6006 bulbs which is what was in it and none of the four I purchased work. I tested the voltage at the terminals and I'm getting 6+ volts at all three connectors. The fuse is fine. Any clue what could be wrong? I'm driving my niece at her wedding and really need the lights!

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum