New Membership Platform: Membee

The ACD Club is rolling out a new online membership system. All ACD Club Members should have receivied an email with enrollment instructions. You will use your email address as your login, and select a new password. This account will be used to renew your membership, update membership information, and make changes to your membership record.


This account is NOT THE SAME as your current account which you use to access the ACD Website Forums. Please continue to log into the Forums with the same username and password as you have always used. In the future we may consolidate the two accounts.

Spare Tire Shelf

  • 1748 S
  • Topic Author
  • Offline
  • ACD Club Member
  • ACD Club Member
More
30 Mar 2021 13:51 #42763 by 1748 S
Spare Tire Shelf was created by 1748 S
what are the dimensions for the spare tire shelf in a Beverly sedan? Is it the same size as the Westchesters?
Thanks...


Gary Parsons

Please Log in or Create an account to join the conversation.

  • Terry Cockerell
  • Terry Cockerell's Avatar
  • Offline
  • Frequent Forum Contributor
  • Frequent Forum Contributor
More
30 Mar 2021 21:55 - 31 Mar 2021 05:51 #42765 by Terry Cockerell
Replied by Terry Cockerell on topic Spare Tire Shelf
Gary I have no idea if the Beverly shelf was deeper. Looking at pictures in Google Images the Beverly may have a hinged section to increase the depth which will fold back to allow the spare wheel to be removed.
Quite a few years ago I made a drawing of my Westchester shelf.
Attached is a copy.

T cockerell
Attachments:
Last edit: 31 Mar 2021 05:51 by Terry Cockerell. Reason: Adding picture

Please Log in or Create an account to join the conversation.

More
01 Apr 2021 02:38 #42783 by john mccall
Replied by john mccall on topic Spare Tire Shelf
It's not the same. As I recall it has a hinge toward the rear section that allows it to drop down at an angle toward the spare. I thought I had info from Rick Hulett that showed the basic outline but it only covered the Westchester and Phaetons which used the same basic board with relatively small modifications.
The following user(s) said Thank You: Jonathan Richards

Please Log in or Create an account to join the conversation.

Time to create page: 0.102 seconds
Powered by Kunena Forum