Safe jack points?

At rear you can jack up under the center of rear spring on each side and place the jack stand outboard as far as possible on the axle. Be careful not to crimp the copper brake line that runs along the axle

uconn_1965 wrote: Don’t jack up the rest at the center point of the axle, you can bend it.. in the front I jack up under the center of front spring and place the jack stand under the stub frame where ever convenient.

Thanks. I used the center of the front spring, but do not see any convenient spot in the rear.

Don’t jack up the rest at the center point of the axle, you can bend it.. in the front I jack up under the center of front spring and place the jack stand under the stub frame where ever convenient.

Because I sadly don't have a lift I need to get our 812 Convertible coupe up high on jack stands. In the front the spring perch looks like a solid spot, but in back I'm not sure. I don't like the look of the axle and I'm thinking jacking from the center of it might be a bad idea.

Does anyone have any suggestions?