- Posts: 70
- Thank you received: 0
new AUBURN-12 mini-heads
- John Baeke
- Topic Author
- Offline
- Senior Member
-
Registered
Less
More
13 Jun 2016 16:53 #31259
by John Baeke
John Baeke
new AUBURN-12 mini-heads was created by John Baeke
Guys & Gals:
How much interest would there be in new manufacture of Auburn-12 single ignition mini-heads of high flow? The originals were made using oil sand molds; thus the very rough internal core had a proclivity for accumulation of coolant debris and clogging. These new ones would be made using modern injection core providing more laminar (i.e. higher velocity) flow of the coolant. Also, would you prefer they be made of cast aluminum or iron? They should also fit on American LaFrance-12 blocks.
Post or directly email me your response.
Cordially,
John Baeke
<a href="mailto:[email protected]][email protected][/url]
How much interest would there be in new manufacture of Auburn-12 single ignition mini-heads of high flow? The originals were made using oil sand molds; thus the very rough internal core had a proclivity for accumulation of coolant debris and clogging. These new ones would be made using modern injection core providing more laminar (i.e. higher velocity) flow of the coolant. Also, would you prefer they be made of cast aluminum or iron? They should also fit on American LaFrance-12 blocks.
Post or directly email me your response.
Cordially,
John Baeke
<a href="mailto:[email protected]][email protected][/url]
John Baeke
Please Log in or Create an account to join the conversation.