Oil Filter

  • curtiss
  • curtiss's Avatar Topic Author
  • Offline
  • Forum Contributor
  • Forum Contributor
More
25 May 2016 21:13 #31138 by curtiss
curtiss created the topic: Oil Filter
I have this oil filter on both my 31 and 33. Does anyone know the part number for the replacement cartridge or where they can be bought? Was this factory or is it an after market part?

Please Log in or Create an account to join the conversation.

More
26 May 2016 00:00 #31140 by RandyEma
RandyEma replied the topic: Re: Oil Filter
Hello. That is an after market filter.If you remove the cover the filter will have a number on it which Napa should be able to interchange. R

Please Log in or Create an account to join the conversation.

More
26 May 2016 01:19 #31142 by olvette64
olvette64 replied the topic: Re: Oil Filter
Hello, It looks very similar to the one I bought for my 1931 Auburn which came off an old Willys. I have also noticed them on older military jeeps. My canister takes a Fram C134PL. Hope this helps.

Please Log in or Create an account to join the conversation.

  • curtiss
  • curtiss's Avatar Topic Author
  • Offline
  • Forum Contributor
  • Forum Contributor
More
02 Jun 2016 16:02 #31214 by curtiss
curtiss replied the topic: Re: Oil Filter
I pulled the old filter and there we no identification numbers on it.

I did a visual comparison online of the C134PL and it may be the same. I will have to see one in person and compare it.

Here are pictures of the one that came out.





Please Log in or Create an account to join the conversation.

More
02 Jun 2016 17:35 #31215 by Tom_Parkinson
Tom_Parkinson replied the topic: Re: Oil Filter
Hi,

Go to NAPA and measure up a 1010 and 1006. One of them should be the canister filter that you need.

--Tom

With brakes, two cylinders are better than one.

Editor-in-Chief, The Hardtop News Magazine, the Journal of the Michiana Dunes Region, Lambda Car Club International

See pix of 1509A here: http://mbcurl.me/YCSE

Please Log in or Create an account to join the conversation.

Moderators: Joe Holderman
Time to create page: 0.128 seconds
Powered by Kunena Forum