Skip to main content

Tech bulletin on setting 852 dual points

  • Terry Cockerell
  • Offline
  • Elite Member
  • Registered
More
01 Sep 2021 07:10 #43827 by Terry Cockerell
Replied by Terry Cockerell on topic Tech bulletin on setting 852 dual points
The Canadian border might be opened by then, also the world opened up to international air travel again ........................... we live in hope.

T cockerell

Please Log in or Create an account to join the conversation.

  • pete kelly
  • Offline
  • Moderator
  • Registered
More
01 Sep 2021 02:09 #43826 by pete kelly
Replied by pete kelly on topic Tech bulletin on setting 852 dual points
Glad to help
SORRY to say I'll miss Auburn again this year.
MAYBE NEXT YEAR
Pete

Please Log in or Create an account to join the conversation.

  • Pwestphal
  • Topic Author
  • Offline
  • Senior Member
  • Registered
More
01 Sep 2021 02:00 #43825 by Pwestphal
Replied by Pwestphal on topic Tech bulletin on setting 852 dual points
Mike, thank you. We had to go the any other way. Fact, the flywheel has 110 teeth, so we marked at 27.5 and timed the second set of points. Thanks to Pete. Kelly for old dual point, it needed work, but is in good order now. Thanks to this group, I have my electrical problem fixed. It turns over with 6 volts with not problem. I think we have over heating fixed, but radiator will be pulled this winter. Also, thank s to Curt Schulze for his advice and parts. See you in Auburn!

Please Log in or Create an account to join the conversation.

  • mikespeed35
  • Offline
  • ACD Club Life Member
  • Registered
More
22 Aug 2021 22:04 #43764 by mikespeed35
Replied by mikespeed35 on topic Tech bulletin on setting 852 dual points
Sun dist. machine, Best. Points synchronizer, good. Any other way, poor, but can be done. Should be set to open 45 degrees apart.
CORDiallyMike

Mike Huffman

Please Log in or Create an account to join the conversation.

  • Pwestphal
  • Topic Author
  • Offline
  • Senior Member
  • Registered
More
22 Aug 2021 17:42 #43759 by Pwestphal
Tech bulletin on setting 852 dual points was created by Pwestphal
Looking for how to set points on dual point dist? Do I need special tool?

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum