Skip to main content

more "Name that part!"

  • Curt Schulze
  • Offline
  • Moderator
  • Registered
More
08 Jan 2014 01:34 #26619 by Curt Schulze
Replied by Curt Schulze on topic stuff
The handles look similar to 34-36 six cylinder closed . Turn the door handle over , look up by the shank, see if there is a small 'L' or 'R' .

I do see a speedster windshield wiper stop in the box.

The bitterness of poor quality remains long after the sweetness of low price is forgotten.
Be of Good Cheer
Curt

Please Log in or Create an account to join the conversation.

  • Chris Summers
  • Offline
  • ACD Club Life Member
  • Registered
More
07 Jan 2014 22:11 #26618 by Chris Summers
Replied by Chris Summers on topic more "Name that part!"
I have a couple of those handles (as part of a grab bag of handles I bought from Joe Kaufmann's). I've shown them to multiple ACD guys and none knew what they were.

Chris Summers
ACD Club
CCCA
H.H. Franklin Club

So we beat on, boats against the current, borne back ceaselessly into the past.

Please Log in or Create an account to join the conversation.

  • RandyEma
  • Offline
  • Duesenberg Historian
  • Registered
More
06 Jan 2014 16:42 #26612 by RandyEma
Replied by RandyEma on topic more "Name that part!"
The door handles are similar to 1933 Auburn salon series but not correct. The carb is a 1914 to 1922 era piece but to my knowledge not Auburn. Randy

Please Log in or Create an account to join the conversation.

  • auburnandyscar
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
05 Jan 2014 22:27 #26604 by auburnandyscar
Replied by auburnandyscar on topic more "Name that part!"


Crazy carb, all brass

Check out my build at:
www.1932auburnsedan.com

Please Log in or Create an account to join the conversation.

  • auburnandyscar
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
05 Jan 2014 22:26 #26603 by auburnandyscar
more "Name that part!" was created by auburnandyscar


Interior handles, I have no clue...

Check out my build at:
www.1932auburnsedan.com

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum