cord 812 oil pressure gauge

More
15 Nov 2017 23:34 #33783 by 1748 S
1748 S replied the topic: cord 812 oil pressure gauge
Here is what and where you will find the oil pump pressure regulator valve and spring. They are located on the pump cover at the bottom.Mine has two nuts added to shim up the spring for higher pressure. They have been lapped to a particular thickness too.You just remove the nut that is actually the spring cover.Out come the spring and maybe some shims.Then a magnet might be needed to pull out the valve. Hope this helpyou and maybe others.

Please Log in or Create an account to join the conversation.

Time to create page: 0.111 seconds
Powered by Kunena Forum