needing help

More
16 Sep 2017 02:48 - 29 Oct 2017 02:42 #33572 by martin0
martin0 created the topic: needing help
The Bendix brake design uses six springs on each wheel. There are two return springs, two hold down, one for the adjuster. What is the function of the sixth spring? I am really confused. Could someone help me.
Last Edit: 29 Oct 2017 02:42 by martin0.

Please Log in or Create an account to join the conversation.

More
16 Sep 2017 23:22 #33574 by RandyEma
RandyEma replied the topic: needing help
Take it off see what it does

Please Log in or Create an account to join the conversation.

  • George van Nostrand
  • George van Nostrand's Avatar
  • Offline
  • ACD Club Member
  • ACD Club Member
More
19 Sep 2017 19:21 #33579 by George van Nostrand
George van Nostrand replied the topic: needing help
The sixth brake spring is used on the Bendix brake with the " secondary stop ". It holds tension on the secondary ( rear ) shoe when adjusting clearance with the cam adjustment.. This brake was used on Cord 812, Auburns 33-36, Cadillac, LaSalle, Olds,Pontiac, some Packards. Reference- Grey-Rock Brake Service Manual.

Restoring 1936 Cord Westchester sedan.2023 A

Please Log in or Create an account to join the conversation.

Time to create page: 0.068 seconds
Powered by Kunena Forum