- Posts: 1748
- Thank you received: 134
Cord 812 Custom Beverly restoration story
- 1748 S
- Offline
- Platinum Forum User
-
Registered
Gary Parsons
Please Log in or Create an account to join the conversation.
- Terry Cockerell
- Offline
- Elite Forum User
-
Registered
- Posts: 1339
- Thank you received: 303
T cockerell
Please Log in or Create an account to join the conversation.
- JIM.OBRIEN
- Offline
- Premium Forum User
-
Registered
- Posts: 586
- Thank you received: 217
Gary I don't understand your question. If your failure resulted in the spring end and the brake backing plate being ground down then the anger bolt didn't fail, the car lost a wheel.
Regardless you should have the safety lops installed just in case.
Please Log in or Create an account to join the conversation.
- mikespeed35
- Offline
- ACD Club Life Member
-
Registered
- Posts: 886
- Thank you received: 194
CORDiallyMike
Mike Huffman
Please Log in or Create an account to join the conversation.
- 1748 S
- Offline
- Platinum Forum User
-
Registered
- Posts: 1748
- Thank you received: 134
Please Log in or Create an account to join the conversation.
- 1748 S
- Offline
- Platinum Forum User
-
Registered
- Posts: 1748
- Thank you received: 134
Please Log in or Create an account to join the conversation.
- 1748 S
- Offline
- Platinum Forum User
-
Registered
- Posts: 1748
- Thank you received: 134
Please Log in or Create an account to join the conversation.
- 1748 S
- Offline
- Platinum Forum User
-
Registered
- Posts: 1748
- Thank you received: 134
Please Log in or Create an account to join the conversation.
- Curt Schulze
- Offline
- Moderator
-
Registered
- Posts: 1014
- Thank you received: 140
The bitterness of poor quality remains long after the sweetness of low price is forgotten.
Be of Good Cheer
Curt
Please Log in or Create an account to join the conversation.
- RubyDS
- Topic Author
- Offline
- Moderator
-
Registered
- Posts: 119
- Thank you received: 10
The front spring hanger rod is just two rod in waiting the correct uppgrade 3/4 rods
Please Log in or Create an account to join the conversation.
- 1748 S
- Offline
- Platinum Forum User
-
Registered
- Posts: 1748
- Thank you received: 134
Gary Parsons
Please Log in or Create an account to join the conversation.
- JIM.OBRIEN
- Offline
- Premium Forum User
-
Registered
- Posts: 586
- Thank you received: 217
It looks like you still have the original front spring hanger rod. You need to upgrade these to 3/4" high strength rods. The original ones were not heavy enough to carry the load and will fail. The spring hangers will catch the spring but if the bolt fails at the top, it drops down and digs into the pavement and can spin the car around.
Jim
Please Log in or Create an account to join the conversation.
- 1748 S
- Offline
- Platinum Forum User
-
Registered
- Posts: 1748
- Thank you received: 134
Gary Parsons
Please Log in or Create an account to join the conversation.
- RubyDS
- Topic Author
- Offline
- Moderator
-
Registered
- Posts: 119
- Thank you received: 10
Please Log in or Create an account to join the conversation.
- RubyDS
- Topic Author
- Offline
- Moderator
-
Registered
- Posts: 119
- Thank you received: 10
Please Log in or Create an account to join the conversation.
- RubyDS
- Topic Author
- Offline
- Moderator
-
Registered
- Posts: 119
- Thank you received: 10
Please Log in or Create an account to join the conversation.
- JIM.OBRIEN
- Offline
- Premium Forum User
-
Registered
- Posts: 586
- Thank you received: 217
Please Log in or Create an account to join the conversation.
- RubyDS
- Topic Author
- Offline
- Moderator
-
Registered
- Posts: 119
- Thank you received: 10
Please Log in or Create an account to join the conversation.
- Curt Schulze
- Offline
- Moderator
-
Registered
- Posts: 1014
- Thank you received: 140
The bitterness of poor quality remains long after the sweetness of low price is forgotten.
Be of Good Cheer
Curt
Please Log in or Create an account to join the conversation.
- Terry Cockerell
- Offline
- Elite Forum User
-
Registered
- Posts: 1339
- Thank you received: 303
T cockerell
Please Log in or Create an account to join the conversation.
- 1748 S
- Offline
- Platinum Forum User
-
Registered
- Posts: 1748
- Thank you received: 134
Please Log in or Create an account to join the conversation.
- RubyDS
- Topic Author
- Offline
- Moderator
-
Registered
- Posts: 119
- Thank you received: 10
Please Log in or Create an account to join the conversation.
- RubyDS
- Topic Author
- Offline
- Moderator
-
Registered
- Posts: 119
- Thank you received: 10
Please Log in or Create an account to join the conversation.
- RubyDS
- Topic Author
- Offline
- Moderator
-
Registered
- Posts: 119
- Thank you received: 10
Please Log in or Create an account to join the conversation.
- RubyDS
- Topic Author
- Offline
- Moderator
-
Registered
- Posts: 119
- Thank you received: 10
For the Soccer it's not my thing............
Please Log in or Create an account to join the conversation.
- Jonathan Richards
- Offline
- Moderator
-
Registered
- Posts: 189
- Thank you received: 24
Please Log in or Create an account to join the conversation.
- RubyDS
- Topic Author
- Offline
- Moderator
-
Registered
- Posts: 119
- Thank you received: 10
Please Log in or Create an account to join the conversation.
- RubyDS
- Topic Author
- Offline
- Moderator
-
Registered
- Posts: 119
- Thank you received: 10
Please Log in or Create an account to join the conversation.
- RubyDS
- Topic Author
- Offline
- Moderator
-
Registered
- Posts: 119
- Thank you received: 10
Please Log in or Create an account to join the conversation.
- RubyDS
- Topic Author
- Offline
- Moderator
-
Registered
- Posts: 119
- Thank you received: 10
Please Log in or Create an account to join the conversation.
- 1748 S
- Offline
- Platinum Forum User
-
Registered
- Posts: 1748
- Thank you received: 134
Please Log in or Create an account to join the conversation.
- RubyDS
- Topic Author
- Offline
- Moderator
-
Registered
- Posts: 119
- Thank you received: 10
Please Log in or Create an account to join the conversation.
- Terry Cockerell
- Offline
- Elite Forum User
-
Registered
- Posts: 1339
- Thank you received: 303
Mine worked out with the following dimensions. Outside diameter 2.5" Inside diameter 2.125" Width 0.5"
T cockerell
Please Log in or Create an account to join the conversation.
- mikespeed35
- Offline
- ACD Club Life Member
-
Registered
- Posts: 886
- Thank you received: 194
CORDiallyMike
Mike Huffman
Please Log in or Create an account to join the conversation.
- Thomas Wilcock
- Offline
- Senior Forum User
-
Registered
- Posts: 89
- Thank you received: 8
Tom
Please Log in or Create an account to join the conversation.
- RubyDS
- Topic Author
- Offline
- Moderator
-
Registered
- Posts: 119
- Thank you received: 10
I have cone 13889 and have ordered 4 cup 13830 availlable next week,many thanks
Please Log in or Create an account to join the conversation.
- Thomas Wilcock
- Offline
- Senior Forum User
-
Registered
- Posts: 89
- Thank you received: 8
Tom
Please Log in or Create an account to join the conversation.
- Terry Cockerell
- Offline
- Elite Forum User
-
Registered
- Posts: 1339
- Thank you received: 303
M28241 / 1R2424 ......... is the needle bearing assembly
138890 .............................. is the taper roller cup
13830 ................................. is the taper roller bearing cone
The outside diameter of the bearing is 2 1/2" which fits inside the outer bearing block.
I can't remember the shaft size of the suspension arm
Any bearing company should be able to readily supply these parts.
T cockerell
Please Log in or Create an account to join the conversation.
- RubyDS
- Topic Author
- Offline
- Moderator
-
Registered
- Posts: 119
- Thank you received: 10
Please Log in or Create an account to join the conversation.
- Terry Cockerell
- Offline
- Elite Forum User
-
Registered
- Posts: 1339
- Thank you received: 303
T cockerell
Please Log in or Create an account to join the conversation.
- uconn_1965
- Offline
- Moderator
-
Registered
- Posts: 369
- Thank you received: 97
bearing Timken 13890
Please Log in or Create an account to join the conversation.
- John Meredith
- Offline
- Senior Forum User
-
Registered
- Posts: 75
- Thank you received: 18
Please Log in or Create an account to join the conversation.
- RubyDS
- Topic Author
- Offline
- Moderator
-
Registered
- Posts: 119
- Thank you received: 10
Please Log in or Create an account to join the conversation.
- uconn_1965
- Offline
- Moderator
-
Registered
- Posts: 369
- Thank you received: 97
the price. They were $280. each. I also bought the 4 bearing that fit these races from a different supplier (old car bearing co.) in
North Carolina. I think they were $35.00 each. I purchased the double row races from Baystate Bearing co., 138 Reed Ave.,
West Hartford, Ct. 06110 phone number (860) 953-0055. Hope this helps....Cliff
Please Log in or Create an account to join the conversation.
- 1748 S
- Offline
- Platinum Forum User
-
Registered
- Posts: 1748
- Thank you received: 134
Please Log in or Create an account to join the conversation.
- RubyDS
- Topic Author
- Offline
- Moderator
-
Registered
- Posts: 119
- Thank you received: 10
Please Log in or Create an account to join the conversation.
- 1748 S
- Offline
- Platinum Forum User
-
Registered
- Posts: 1748
- Thank you received: 134
Please Log in or Create an account to join the conversation.
- RubyDS
- Topic Author
- Offline
- Moderator
-
Registered
- Posts: 119
- Thank you received: 10
Please Log in or Create an account to join the conversation.
- RubyDS
- Topic Author
- Offline
- Moderator
-
Registered
- Posts: 119
- Thank you received: 10
Please Log in or Create an account to join the conversation.
- JIM.OBRIEN
- Offline
- Premium Forum User
-
Registered
- Posts: 586
- Thank you received: 217
Please Log in or Create an account to join the conversation.