- Posts: 43
- Thank you received: 5
brake springs - 31-33 auburn (not hydraulic)
- C.R.D.
- Offline
- Moderator
-
Registered
Less
More
19 Feb 2018 14:50 #34207
by C.R.D.
Replied by C.R.D. on topic brake springs - 31-33 auburn (not hydraulic)
Check with the factory, they had some a couple years ago.
Carl
Carl
Please Log in or Create an account to join the conversation.
- Curt Schulze
- Offline
- Moderator
-
Registered
Less
More
- Posts: 1012
- Thank you received: 140
19 Feb 2018 12:41 #34206
by Curt Schulze
The bitterness of poor quality remains long after the sweetness of low price is forgotten.
Be of Good Cheer
Curt
Replied by Curt Schulze on topic brake springs - 31-33 auburn (not hydraulic)
Tom, You may need to re-post the pix. It is very garbled on my computer. Looks like copper mesh.
The bitterness of poor quality remains long after the sweetness of low price is forgotten.
Be of Good Cheer
Curt
Please Log in or Create an account to join the conversation.
- thomaslee
- Topic Author
- Offline
- ACD Club Past President
-
Registered
Less
More
- Posts: 117
- Thank you received: 18
19 Feb 2018 04:20 - 19 Feb 2018 13:25 #34205
by thomaslee
brake springs - 31-33 auburn (not hydraulic) was created by thomaslee
I was putting my front brakes back together the other day on my '33 Auburn, and the main spring broke. made me a bit concerned -- must have been brittle from age.
So I need one and would like two springs for the car's brakes. here is a picture of what I need. its the horizontal spring shown in the picture.
it has two coils which slide over a center spring steel rod. the relaxed length is about 8 3/4".
anyone have any lying around?
So I need one and would like two springs for the car's brakes. here is a picture of what I need. its the horizontal spring shown in the picture.
it has two coils which slide over a center spring steel rod. the relaxed length is about 8 3/4".
anyone have any lying around?
Last edit: 19 Feb 2018 13:25 by thomaslee.
Please Log in or Create an account to join the conversation.