8-98A Running Board Side Stainless Install

  • curtiss
  • curtiss's Avatar Topic Author
  • Offline
  • Forum Contributor
  • Forum Contributor
More
18 Jan 2017 17:30 - 18 Jan 2017 17:30 #32294 by curtiss
curtiss created the topic: 8-98A Running Board Side Stainless Install
I just received new running board side stainless and no holes were pre-drilled. I picked up some molding mount clips from Fastenal that look like they will work to secure the outer molding so not I need to figure out how many holes were typically drilled to mount these.

It appears in the last restoration the old holes were filled in so would one of you be able to look to see how many studs you have holding the running board stainless on?

Thanks!
Last Edit: 18 Jan 2017 17:30 by curtiss.

Please Log in or Create an account to join the conversation.

More
19 Jan 2017 14:33 #32304 by ilikescars
ilikescars replied the topic: 8-98A Running Board Side Stainless Install
Curtiss: On my 36 Auburn, I ended up drilling extra holes near the ends of the trim to help hold the trim in tighter.
Then re-positioned the fasteners as needed. (No one noticed the difference in the amount of holes)
Mark

Please Log in or Create an account to join the conversation.

More
19 Jan 2017 17:16 - 19 Jan 2017 22:32 #32306 by Rlamb10769
Rlamb10769 replied the topic: 8-98A Running Board Side Stainless Install

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Attachment not found

I have attached a photo of my SS attachment, there are five of them..
Richard

Richard

Richard Lambert
ACD #3371
Attachments:
Last Edit: 19 Jan 2017 22:32 by Rlamb10769. Reason: Add photo

Please Log in or Create an account to join the conversation.

  • curtiss
  • curtiss's Avatar Topic Author
  • Offline
  • Forum Contributor
  • Forum Contributor
More
19 Jan 2017 23:21 #32312 by curtiss
curtiss replied the topic: 8-98A Running Board Side Stainless Install
Awesome, thanks for the pictures!

Please Log in or Create an account to join the conversation.

More
22 Jan 2017 18:52 #32315 by johnmereness
johnmereness replied the topic: 8-98A Running Board Side Stainless Install
On an 851 and 852 I believe the original nut is square - you may want to ask about what is original 31 /32.

JMM

Please Log in or Create an account to join the conversation.

  • curtiss
  • curtiss's Avatar Topic Author
  • Offline
  • Forum Contributor
  • Forum Contributor
More
23 Jan 2017 19:45 #32325 by curtiss
curtiss replied the topic: 8-98A Running Board Side Stainless Install
Thanks for the answers and pictures, Debby and I got them drilled and installed last night. I ended up having to use some Chrysler molding clips I picked up from Fasenal to slide into the outer strip. I had to cut off the spring end but they worked great.

Had to buy a box of 50 to get 10 :)



Molding Clips
Chrysler: 1624705 6010093 Universal Moulding Fastener
Attachments:

Please Log in or Create an account to join the conversation.

Time to create page: 0.158 seconds
Powered by Kunena Forum